Proline Prowirl 73 Identification
Endress+Hauser 15
2.2 Certificates and approvals
The devices are designed in accordance with good engineering practice to meet state-of-the-art
safety requirements, have been tested, and left the factory in a condition in which they are safe to
operate. The devices comply with the applicable standards and regulations in accordance with
EN 61010-1"Safety requirements for electrical equipment for measurement, control and laboratory
use" and the EMC requirements as per IEC/EN 61326.
The measuring system described in these Operating Instructions thus complies with the statutory
requirements of the EC Directives. Endress+Hauser confirms successful testing of the device by
affixing to it the CE mark and issuing the CE Declaration of Conformity.
The measuring system meets the EMC requirements of the "Australian Communications and Media
Authority (ACMA)".
2.3 Registered trademarks
GYLON®
Registered trademark of Garlock Sealing Technologies, Palmyar, NY, USA
HART
®
Registered trademark of the HART Communication Foundation, Austin, USA
INCONEL
®
Registered trademark of Inco Alloys International Inc., Huntington, USA
KALREZ
®
and VITON
®
Registered trademarks of E.I. Du Pont de Nemours & Co., Wilmington, USA
Applicator
®
, FieldCare
®
, Fieldcheck
®
, Field Xpert™
Registered or registration-pending trademarks of Endress+Hauser Flowtec AG, Reinach, CH
To Next Page
Loading...
