Endress+Hauser Proline Prowirl 73 - System Units

Description of device functions Proline Prowirl 73
102 Endress+Hauser
11.3 SYSTEM UNITS
Function description, SYSTEM UNITS group
UNIT VOLUME FLOW Description
For selecting the unit required and displayed for the volume flow.
The unit you select here is also valid for:
• Flow display
• Current output (value 20 mA)
• Frequency output (pulse value; value-f low, value-f high; on-value/off-value)
• On-value low flow cut off
• Simulation measurand
The units for the totalizers are independent of the option selected here. They are selected
in the UNIT TOTALIZER function (ä 117).
The following time units can be selected:
s = second, m = minute, h = hour, d = day
Options
SI:
Cubic centimeter  cm³/time unit
Cubic decimeter  dm³/time unit
Cubic meter  m³/time unit
Milliliter  ml/time unit
Liter  l/time unit
Hectoliter  hl/time unit
Megaliter  Ml/time unit MEGA
US:
Cubic centimeter  cc/time unit
Acre foot  af/time unit
Cubic foot  ft³/time unit
Fluid ounce  ozf/time unit
Gallon  US gal/time unit
Kilo gallon  US Kgal/time unit
Mega gallon  US Mgal/time unit
Barrel (normal fluids: 31.5 gal/bbl)  US bbl/time unit NORM.
Barrel (beer: 31.0 gal/bbl)  US bbl/time unit BEER
Barrel (petrochemicals: 42.0 gal/bbl)  US bbl/time unit PETR.
Barrel (filling tanks: 55.0 gal/bbl)  US bbl/time unit TANK
Imperial:
Gallon  imp. gal/time unit
Mega gallon  imp. Mgal/time unit
Barrel (beer: 36.0 gal/bbl)  imp. bbl/time unit BEER
Barrel (petrochemicals: 34.97 gal/bbl)  imp. bbl/time unit PETR.
Arbitrary volume unit:
This option does not appear unless a volume unit was defined via the TEXT ARBITRARY
VOLUME UNIT function (ä 107).
Factory setting
See the parameter printout provided. The parameter printout is an integral part of these
Operating Instructions.
UNIT TEMPERATURE Description
For selecting the unit required and displayed for the temperature.
Options
°C (CELSIUS)
K (KELVIN)
°F (FAHRENHEIT)
R (RANKINE)
Factory setting
Depends on country ä 180