Endress+Hauser Proline Prowirl 73 - Page 103

Proline Prowirl 73 Description of device functions
Endress+Hauser 103
UNIT MASS FLOW Description
For selecting the unit required and displayed for the calculated mass flow.
The unit you select here is also valid for:
• Flow display
• Current output (value 20 mA)
• Frequency output (pulse value; value-f low, value-f high; on-value/off-value)
• On-value low flow cut off
• Simulation measurand
The following time units can be selected:
s = second, m = minute, h = hour, d = day
Options
SI:
Gram  g/time unit
Kilogram  kg/time unit
Metric ton  t/time unit
US:
Ounce  oz/time unit
Pound  lb/time unit
Mega pound  Mlb/time unit
Ton  ton/time unit
Factory setting
See the parameter printout provided. The parameter printout is an integral part of these
Operating Instructions.
UNIT CORRECTED
VOLUME FLOW
Description
For selecting the unit required and displayed for the corrected volume flow.
The unit you select here is also valid for:
• Flow display
• Current output (value 20 mA)
• Frequency output (pulse value; value-f low, value-f high; on-value/off-value)
• On-value low flow cut off
• Simulation measurand
The following time units can be selected:
s = second, m = minute, h = hour, d = day
Options
SI:
Standard liter Nl/time unit
Standard cubic meter  Nm³/time unit
US:
Standard cubic meter  Sm³/time unit
Standard cubic feet  Scf/time unit
Factory setting
See the parameter printout provided. The parameter printout is an integral part of these
Operating Instructions.
Function description, SYSTEM UNITS group