Endress+Hauser Proline Prowirl 73 - User Interface Functions

Description of device functions Proline Prowirl 73
112 Endress+Hauser
11.7 USER INTERFACE
Function description, USER INTERFACE group
ASSIGN LINE 1 Description
For assigning a display value to the main line (top line of the local display).
This value is displayed during normal operation.
• The appropriate unit is selected in the SYSTEM UNITS group (ä 102).
• Totalizer 1 is indicated on the local display by "I" and totalizer 2 by "II".
Options
OFF
VOLUME FLOW
VOLUME FLOW IN %
TEMPERATURE
MASS FLOW
MASS FLOW IN %
CORRECTED VOLUME FLOW
CORRECTED VOLUME FLOW IN %
HEAT FLOW
HEAT FLOW IN %
TOTALIZER 1
TOTALIZER 2
Factory setting
• If LIQUID VOLUME, GAS VOLUME or nothing was specified as the fluid when
ordering, the factory setting is VOLUME FLOW
• Otherwise the factory setting is MASS FLOW