Endress+Hauser Proline Prowirl 73 - Page 117

Proline Prowirl 73 Description of device functions
Endress+Hauser 117
UNIT TOTALIZER Description
For selecting the unit for the measured variable assigned to the totalizer.
Options
SI:
Cubic centimeter  cm³
Cubic decimeter  dm³
Cubic meter  m³
Milliliter  ml
Liter  l
Hectoliter  hl
Megaliter  Ml
US:
Cubic centimeter  cc
Acre foot  af
Cubic foot  ft³
Fluid ounce  ozf
Gallon  US gal
Kilo gallon  US Kgal
Mega gallon  US Mgal
Barrel (normal fluids: 31.5 gal/bbl)  US bbl NORM.FL.
Barrel (beer: 31.0 gal/bbl)  US bbl BEER
Barrel (petrochemicals: 42.0 gal/bbl)  US bbl PETR.
Barrel (filling tanks: 55.0 gal/bbl)  US bbl TANK
IMPERIAL:
Gallon  imp. gal
Mega gallon  imp. Mgal
Barrel (beer: 36.0 gal/bbl)  imp. bbl BEER
Barrel (petrochemicals: 34.97 gal/bbl)  imp. bbl PETR.
Arbitrary volume unit:
This option does not appear unless a volume unit was defined via the TEXT ARBITRARY
VOLUME UNIT function (ä 107).
Factory setting
Depends on country ä 180
Options (ASSIGN TOTALIZER = MASS FLOW)
SI g, kg, t
US oz, lb, ton, Mlb
Factory setting
Depends on country ä 180
Options (ASSIGN TOTALIZER = CORRECTED VOLUME FLOW)
SI  Nl, Nm
3
US  Sm
3
, Scf
Factory setting
Depends on country ä 180
Options (ASSIGN TOTALIZER = HEAT FLOW)
SI  kWh, MWh, kJ, MJ, GJ, kcal, Mcal, Gcal
US  kBtu, MBtu, GBtu, tonh
Factory setting
Depends on country ä 180
RESET TOTALIZER Description
Resets the sum and overflow in the totalizer selected to 0 (=RESET).
Options
NO
YES
Factory setting
NO
Function description, TOTALIZER 1 and 2 group