Endress+Hauser Promag 53 - Page 163

Promag 53 PROFIBUS-DP/-PA 10 Technical data
Endress+Hauser 163
External pipe thread ISO 228 /
DIN 2999, 1.4404 / 316L
5*H**-K***********
Sensor Pipe di G L S H x B
DN [mm]
Internal thread
[inch]
[mm] [inch] [mm] [mm] [mm]
2...8 R 3/8" 10 3/8" 40 10.1 60 x 42
15 R 1/2" 16 1/2" 40 13.2 60 x 42
1" (25 ANSI) R 1" 25 1" 40 16.5 70 x 52
Fitting length = (2 x L) + 86 mm
G
di
L
H x B
S
F06-xxHxxxxx-06-09-07-xx-025
Internal pipe thread ISO 228 /
DIN 2999, 1.4404 / 316L
5*H**-L***********
Sensor Pipe di G D L S H x B
DN [mm]
External thread
[inch]
[mm] [inch] [mm] [mm] [mm] [mm]
2...8 Rp 3/8" 8,9 3/8" 22 45 13 60 x 42
15 Rp 1/2" 16,0 1/2" 27 45 14 60 x 42
1" (25 ANSI) Rp 1" 27,2 1" 40 49 17 70 x 52
Fitting length = (2 x L) + 86 mm
D
G
di
L
H x B
S
F06-xxHxxxxx-06-09-07-xx-027
Hose connection
1.4404 / 316L
5*H**-M/N/P***********
Sensor Hose di LW L H x B
DN [mm]
Inside diameter
[mm]
[mm] [mm] [mm] [mm]
2...8 13 10.0 13 49 60 x 42
15 16 12.6 16 49 60 x 42
15 19 16.0 19 49 70 x 52
Fitting length = (2 x L) + 86 mm
F06-xxHxxxxx-06-09-07-xx-024
Adhesive fitting
PVC
5*H**-R/S***********
Sensor Pipe di G L H x B
DN [mm] Glued joint [inch] [mm] [mm] [mm] [mm]
2...8 1/2" 21.5 27.3 28.0 60 x 42
15 20 x 2 20.2 27.0 38.5 60 x 42
– Fitting length = (2 x L) + 86 mm
– The requisite ground rings can be ordered as accessories (Order No. DK5HR-****)
F06-xxHxxxxx-06-09-07-xx-028