Endress+Hauser Promag 53 - Page 66

5 Operation Promag 53 PROFIBUS-DP/-PA
66 Endress+Hauser
Other icons
a Measuring mode = PULSATING FLOW
b Counting mode, totalizer = BALANCE (forwards and reverse flow)
c Measuring mode = SYMMETRY (bidirectional)
d Counting mode, totalizer = forwards
e Measuring mode = STANDARD
f Counting mode, totalizer = reverse
g Icon for volume flow
h Icon for mass flow
i Status of Analog Output 1 (display value) with status OK
j Status of Analog Output 1 (display value) with status UNC = uncertain
k Status of Analog Output 1 (display value) with status BAD
l Status of Analog Input 1...2 with status OK
m Status of Totalizers 1...3 with status OK
n Status of Analog Input 1...2 with status UNC = uncertain
o Status of Totalizers 1...3 with status UNC = uncertain
p Status of Analog Input 1...2 with status BAD
q Status of Totalizers 1...3 with status BAD
a
b
e
f
j
i
c
g
k
l
n
p
m
o
q
d
h
F06-53xPBxxx-07-xx-xx-xx-000