Endress+Hauser RMA 421 - Display;Measurement Range

Parameter Setting up selections
Default
settings
Actual
setting
* Cold junction
temperature
COMPT
Selection between
internal and external cold
junction temperature on
thermocouples
INT Compensation
temperature measure
with internal sensor
CONST Fixed compensation
temperature
INT
* Constant
comparison temp.
FTMP
Enter the constant
comparison temperature
on thermocouples
value:
0 ... 200
0
DISPL
5.2 Display/measurement range
Parameter Setting up selections
Default
settings
Actual
setting
* Decimal point
DI DP
Selection of the decimal
points for the numeric
display, the
measurement range and
the alarm relay switch
threshold.
Selection range:
0 to 4 decimal points
9999,9
Display value 0%
DI LO
Display value at 0%
sensor value
Value:
-19999 to 99999
0,0
Display value 100%
DI HI
Display value at 100%
sensor value
Value:
-19999 to 99999
100,0
Offset
OFFST
Signal offset to match
measured value display.
Value:
-19999 to 99999
0,0
Process transmitter
58