Document number: ED.03783.00.001.ENG rev 4 Page 116 of 153
Travel all trolleys synchronously. Monitor the
travelled distances shown in the display. Also
measure the actual distance.
While travelling make sure the trolleys stay equally
in distance.
Hazard
The stability of the system is in
danger when the trolleys get
out of sync.
NB
Do not shut off the remote control during travelling! The travel distance of each
trolley will be set to zero when you start up the remote control again. All
deviations between the trolleys are lost and must be checked and adapted as
within the start position.
NB
Check if the data and power cables will not stick behind something and will be
damaged.
To Next Page
Loading...
