Enerpac JS125 - Mechanics

www.enerpac.com
Document number: ED.03783.00.001.ENG rev 4 Page 127 of 153
10.4 Mechanics
Before layup of the System, lubricate/ grease components such as bearings, connecting pins and bolts to prevent corrosion.
Maintenance jobs to be executed:
Subject
Action
Person
O (owner)
EE (Enerpac expert)
First 40 hours
8 hours Daily
40 hours
Weekly
Each 500
hours
Each year
2000 hours
Every 2 years
10000 hours
Every 10 year
Remarks
1. Main
1.1. Mechanical frame
Clean the frame
O
x
Maintain the paint
O
x
1.2. Main jacks
Grease the cylinders against rust.
O
x
1.3. Insertion system
Oil the moving parts
O
x
1.4. Guiding pads
Check on damage and excessive wear
O
x
See [2]
below
1.5. Mini jacks
Grease the mini-jacks
O
x
See [1]
below