Enerpac JS125 - 1 Introduction; Manufacturer Address; Declaration; Referenced Documents

www.enerpac.com
Document number: ED.03783.00.001.ENG rev 4 Page 7 of 153
1 Introduction
1.1 Manufacturer address
Enerpac Heavy Lifting Technology B.V.
Zuidelijke Havenweg 3,
7554 RR Hengelo (Ov)
The Netherlands
Tel. +31 74 242 20 45
Fax. +31 74 243 03 38
Email: info.hengelo@enerpac.com
Website: www.enerpac.com
1.2 Declaration
Declaration of Conformity according to Machine Directive 2006/42/EC.
For the EC Declaration of Conformity reference is made to ref [5] “EC Declaration of conformity”
which is part of the product delivery.
1.3 Referenced documents
The following documents are referred to in this manual:
Ref
Name
Identification
Manufacturer
1. Operation of electrical
installations - Low voltage
NEN 3140
NEN
2. Operation of electrical
installations
NEN-EN 50110-1
NEN
3. General rules and safety
requirements for systems
and their components
NEN-EN-ISO 4413
NEN
4. Technical handbook
Enerpac
5. EC Declaration of conformity
Enerpac
6. ASME B30.1-2015
Jacks, Industrial Rollers, Air Casters,
and Hydraulic Gantries.
(Safety Standard for Cableways, Cranes,
Derricks, Hoists, Hooks, Jacks and Slings)
American Society
of Mechanical
Engineers
1.4 Identification
Each main component is fitted with a name plate as shown below.

Name plates are official documents. It is not permitted to alter them or render
them illegible.