Enerpac JS125 - Barrel; Top Barrel; Insertion System

www.enerpac.com
Document number: ED.03783.00.001.ENG rev 4 Page 53 of 153
5.1.2 Barrel
Use a forklift to hoist a barrel.
5.1.3 Top barrel
Use a crane to hoist the top barrel. Use the lugs.
5.1.4 Insertion system
Dependent on the system, the insertion system might be supplied with lifting lugs.
If so, use the lifting lugs to hoist the insertion system.
The JS125 system is delivered with the insertion system already mounted.
If you nevertheless want to handle the insertion system then use slings to hoist.
forklift hole
lug
lug