Document number: ED.03783.00.001.ENG rev 4 Page 146 of 153
Blend of polyolefins and additives
CAS-No. EC-No. Registration
number
Classification
(REGULATION
(EC) No 1272/2008)
Distillates (Fischer -
Tropsch), heavy, C18-
50 – branched, cyclic and linear
848301-69-9
482-220-0
01-0000020163-82
Skin Corr.1B;
H314 Skin Sens.1A;
H317 Aquatic Chronic1;
H410
Description of first aid measures
Protection of first-
aiders
When administering first aid, ensure that you are wearing the appropriate personal protective
equipment according to the incident, injury and surroundings.
No treatment necessary under normal conditions of use. If symptoms persist, obtain medical
advice.
Remove contaminated clothing. Flush exposed area with water and follow by washing with soap if
available. If persistent irritation occurs, obtain medical attention. When using high pressure
equipment, injection of product under the skin can occur. If high pressure injuries occur, the
casualty should be sent immediately to a hospital. Do not wait for symptoms to develop. Obtain
medical attention even in the absence of apparent wounds.
Flush eye with copious quantities of water.
Remove contact lenses, if present and easy to do. Continue rinsing. If persistent irritation occurs,
obtain medical attention.
In general no treatment is necessary unless large quantities are swallowed, however, get medical
advice.
Most important symptoms and effects, both acute and delayed
Oil acne/folliculitis signs and symptoms may include formation of black pustules and spots on the
skin of exposed areas. Ingestion may result in nausea, vomiting and/or diarrhoea. Local necrosis
is evidenced by delayed onset of pain and tissue damage a few hours following injection.
Indication of any immediate medical attention and special treatment needed
Notes to doctor/physician:
Treat symptomatically.
High pressure injection injuries require prompt surgical intervention and possibly steroid therapy,
to minimise tissue damage and loss of function. Because entry wounds are small and do not
reflect the seriousness of the underlying damage, surgical exploration to determine the extent of
involvement may be necessary. Local anaesthetics or hot soaks should be avoided because they
can contribute to swelling, vasospasm and ischaemia. Prompt surgical decompression,
debridement and evacuation of foreign material should be performed under general anaesthetics,
and wide exploration is essential.
Suitable extinguishing media
Unsuitable extinguishing media
Foam, water spray or fog. Dry chemical powder, carbon dioxide, sand or earth may
be used for small fires only. Do not use water in a jet
Special hazards arising from the substance or mixture
Specific hazards during
firefighting
Hazardous combustion products may include: A complex mixture of airborne solid
and liquid particulates and gases (smoke). Carbon monoxide may be evolved if
incomplete combustion occurs. Unidentified organic and inorganic compounds
Special protective equipment for
firefighters
Proper protective equipment including chemical resistant gloves are to be worn;
chemical resistant suit is indicated if large contact with spilled product is expected.
Self-Contained Breathing Apparatus must be worn when approaching a fire in a
confined space. Select fire fighter's clothing approved to relevant Standards (e.g.
Europe: EN469).
Specific extinguishing methods
Use extinguishing measures that are appropriate to local circumstances and the
surrounding environment
6. Accidental release measures
Personal precautions, protective equipment and emergency procedures
6.1.1 For non emergency personnel: Avoid contact with skin and eyes.
6.1.2 For emergency responders: Avoid contact with skin and eyes
Environmental precautions
Environmental
precautions
Use appropriate containment to avoid environmental contamination. Prevent from spreading or
entering drains, ditches or rivers by using sand, earth, or other appropriate barriers.
Local authorities should be advised if significant spillages cannot be contained
Methods and materials for containment and cleaning up
Slippery when spilt. Avoid accidents, clean up immediately. Prevent from spreading by making
a barrier with sand, earth or other containment material.
Reclaim liquid directly or in an absorbent. Soak up residue with an absorbent such as clay, sand
or other suitable material and dispose of properly
Reference to other sections
For guidance on selection of personal protective equipment see Chapter 8 of this Safety Data Sheet., For guidance on
disposal of spilled material see Chapter 13 of this Safety Data Sheet
To Next Page
Loading...
