Enerpac JS125 - Page 56

www.enerpac.com
Document number: ED.03783.00.001.ENG rev 4 Page 56 of 153
2.
Connect the smartbox with one of the
units. You can pick a unit at random since
there is no prescribed sequence of
connecting. The units will identify
themselves electronically.
The sockets on the connection box are
equivalent; pick one of them at random.
Use the provided data cables.
Remove the lifting bracket in front of the
connection box if necessary.
3.
Connect all units to each other, according
to the scheme.
4.
Provide the unused socket of the last
unit(s) with the data end plug.
5.
Connect all units with the main power.