Entrust Sigma DS3 User Manual

Sigma DS1, DS2, DS3 Card Printer User’s Guide 5
Printer Front and Right Side
Single-Hopper Printer
Input Hopper The input hopper holds cards for printing. The hopper holds up to
125 cards (0.030 in. or 0.762 mm thickness).
The input hopper can be removed from the printer for secure
storage.
Input Hopper Release
Buttons
The release buttons allow you to remove the input hopper from the
printer. Push in the buttons, squeeze the cartridge, and pull it out
from the printer.
Exception Slot Use the exception slot to insert a single card, such as a different card
type than those loaded in the input hopper.
Front Panel Use the front panel to work with the printer. The LCD panel displays
printer messages and status information. The buttons allow you to
power the printer on and off, and navigate the printer menu system.
Output Hopper The output hopper holds up to 25 completed cards.
LED Light Bar The LED light bar blinks to indicate a printer error status. It is a solid
color when the printer is in Ready status.
Output
Hopper
Input Hopper
Input
Hopper Lock
Printer Lock
Reject Tray
LED Light Bar
Exception
Slot
Front Panel
Input Hopper
Release Buttons

Entrust Sigma DS3 Specifications

General

Print Resolution	300 dpi
Card Capacity Input Hopper	100 cards
Card Capacity Output Hopper	25 cards
Power Supply	100-240 VAC, 50/60 Hz
Print Technology	Dye sublimation
Print Capabilities	Single or dual-sided
Card Thickness	0.010 inches to 0.040 inches
Supported Card Sizes	CR80 (85.6 mm x 54 mm)
Connectivity	USB and Ethernet
Operating System Support	Windows 7, 8, 10, Server 2008, 2012, 2016
Weight	5.49 kg (12.1 lbs)
Operating Temperature	15°C to 35°C (60°F to 95°F)
Operating Humidity	20% to 80% (non-condensing)
Print Speed	Up to 250 cards per hour (YMCKT)