EasyManuals Logo

Entrust Sigma DS3 User Manual

Default Icon
90 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #83 background imageLoading...
Page #83 background image
Sigma DS1, DS2, DS3 Card Printer User’s Guide 73
149: Option not installed
The printer does not support the personalization being requested for the card. The card will be
canceled.
Change the card data to match the printers options and settings, or print to a printer that is
configured to support the personalization being requested.
Press the User button on the printer to clear the message. Or, click OK in the Card Printer Driver
message.
HINTS & TIPS
In the card format, don’t include references to hardware that cannot be accessed by the system.
For more information, refer to your ID software documentation or ask your system administrator.
150: Print while unlocked
The printer is unlocked. The card will be canceled.
Make sure that all access doors are closed securely and locked.
Click OK in the Card Printer Driver message.
151: Failed to lock
An attempt to lock the printer failed. The card will be canceled.
1. Make sure that all access doors are closed securely.
2. Try locking the printer again.
Click OK in the Card Printer Driver message.
HINTS & TIPS
Make sure that the reject tray is installed properly before locking the printer.
152: Insert new card side 2 up
1. Turn a new card over end to end so side 2 is facing up.
2. Insert the card in the printer.
3. If the card is not immediately picked, press the printers U
SER button or click OK.
Click Cancel in the Card Printer Driver message to cancel the card.

Table of Contents

Other manuals for Entrust Sigma DS3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Entrust Sigma DS3 and is the answer not in the manual?

Entrust Sigma DS3 Specifications

General IconGeneral
Print Resolution300 dpi
Card Capacity Input Hopper100 cards
Card Capacity Output Hopper25 cards
Power Supply100-240 VAC, 50/60 Hz
Print TechnologyDye sublimation
Print CapabilitiesSingle or dual-sided
Card Thickness0.010 inches to 0.040 inches
Supported Card SizesCR80 (85.6 mm x 54 mm)
ConnectivityUSB and Ethernet
Operating System SupportWindows 7, 8, 10, Server 2008, 2012, 2016
Weight5.49 kg (12.1 lbs)
Operating Temperature15°C to 35°C (60°F to 95°F)
Operating Humidity20% to 80% (non-condensing)
Print SpeedUp to 250 cards per hour (YMCKT)

Related product manuals