Entrust Sigma DS3 User Manual

64 Troubleshooting
 If there is more than one card printer installed on the PC and each has issued errors, the
printer driver displays the messages received, even if you cleared the error at the printer.
 The Card Printer Driver can issue messages that do not display on the printer LCD panel.
Refer to “Driver-Only Messages” on page 76 and “Driver SDK Messages” on page 78 for a list
of these messages.
Messages in the Printer Dashboard
The Printer Dashboard also displays error messages. Follow the instructions in the message to
continue working with the printer. Refer to the Printer Dashboard Help for more information.
Other Messages
 The card production application you use also may issue messages.
 Other printers can cause messages if more than one model of card printer is installed.
Respond to Messages
You can respond to printer messages using the printer front panel buttons or by clicking the
appropriate response in the message displayed by the Card Printer Driver on the PC.

Entrust Sigma DS3 Specifications

General

Print Resolution	300 dpi
Card Capacity Input Hopper	100 cards
Card Capacity Output Hopper	25 cards
Power Supply	100-240 VAC, 50/60 Hz
Print Technology	Dye sublimation
Print Capabilities	Single or dual-sided
Card Thickness	0.010 inches to 0.040 inches
Supported Card Sizes	CR80 (85.6 mm x 54 mm)
Connectivity	USB and Ethernet
Operating System Support	Windows 7, 8, 10, Server 2008, 2012, 2016
Weight	5.49 kg (12.1 lbs)
Operating Temperature	15°C to 35°C (60°F to 95°F)
Operating Humidity	20% to 80% (non-condensing)
Print Speed	Up to 250 cards per hour (YMCKT)