Entrust Sigma DS3 User Manual

Sigma DS1, DS2, DS3 Card Printer User’s Guide 43
Empty the Reject Tray
The printer places rejected cards (unfinished cards or cards that were not processed properly) in
the reject tray.
Do the following to remove cards from the reject
tray.
1. Unlock the printer and pull out the reject tray.
2. Remove the cards from the tray.
3. Close the tray and lock the printer.
An administrator can change the reject card location to the output hopper using the
Printer Dashboard.
Printers without a reject tray eject the card into the output hopper.
You must unlock the printer to pull out
the reject tray.

Entrust Sigma DS3 Specifications

General

Print Resolution	300 dpi
Card Capacity Input Hopper	100 cards
Card Capacity Output Hopper	25 cards
Power Supply	100-240 VAC, 50/60 Hz
Print Technology	Dye sublimation
Print Capabilities	Single or dual-sided
Card Thickness	0.010 inches to 0.040 inches
Supported Card Sizes	CR80 (85.6 mm x 54 mm)
Connectivity	USB and Ethernet
Operating System Support	Windows 7, 8, 10, Server 2008, 2012, 2016
Weight	5.49 kg (12.1 lbs)
Operating Temperature	15°C to 35°C (60°F to 95°F)
Operating Humidity	20% to 80% (non-condensing)
Print Speed	Up to 250 cards per hour (YMCKT)