Entrust Sigma DS3 User Manual

5
Sigma DS1, DS2, DS3 Card Printer User’s Guide 37
Chapter 5: System
Maintenance
This chapter provides information to help you maintain your printer for
optimal performance.
Maintain the Printer
The printer performs best when it is cleaned on a regular basis. Follow the recommended
cleaning guidelines to keep the printer in good working condition.
Clean the printer when:
 There is debris on completed cards.
 New print ribbon is installed.
You can perform the following cleaning tasks:
 Clean the Printer on page 38
 Clean the Printhead on page 42
 Empty the Reject Tray on page 43

Entrust Sigma DS3 Specifications

General

Print Resolution	300 dpi
Card Capacity Input Hopper	100 cards
Card Capacity Output Hopper	25 cards
Power Supply	100-240 VAC, 50/60 Hz
Print Technology	Dye sublimation
Print Capabilities	Single or dual-sided
Card Thickness	0.010 inches to 0.040 inches
Supported Card Sizes	CR80 (85.6 mm x 54 mm)
Connectivity	USB and Ethernet
Operating System Support	Windows 7, 8, 10, Server 2008, 2012, 2016
Weight	5.49 kg (12.1 lbs)
Operating Temperature	15°C to 35°C (60°F to 95°F)
Operating Humidity	20% to 80% (non-condensing)
Print Speed	Up to 250 cards per hour (YMCKT)