EasyManuals Logo

Entrust Sigma DS3 User Manual

Default Icon
90 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #87 background imageLoading...
Page #87 background image
Sigma DS1, DS2, DS3 Card Printer User’s Guide 77
502: The card data is missing or is not usable
The printer driver has detected invalid or missing data. The card will be canceled.
Make sure the data being sent is formatted properly and matches the options and settings in the
printer.
Click OK to clear the message.
504: The card data is missing or is not usable
The printer driver has detected invalid or missing data. The card will be canceled.
Make sure the data being sent is formatted properly and matches the options and settings in the
printer.
Click OK to clear the message.
505: USB communication issue
An important driver component is not running. The card will be canceled.
1. Restart the computer. The component should start automatically.
2. If this message is displayed after restarting, notify your printer support contact.
Click OK to clear the message.
506: A card is currently processing
The printer is busy processing an interactive job. The card will be canceled.
Wait until the current card is complete and then try again.
Click OK to clear the message.
507: The printer is unlocked
The printer must be locked to print.
To complete the current card make sure that all access doors are closed securely and locked.
Click OK to clear the message, or click Cancel to cancel the card.
508: The printer is shutting down
The printer is shutting down or resetting. The card will be canceled.
When printer is powered back on, try again.
Click OK to clear the message.

Table of Contents

Other manuals for Entrust Sigma DS3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Entrust Sigma DS3 and is the answer not in the manual?

Entrust Sigma DS3 Specifications

General IconGeneral
Print Resolution300 dpi
Card Capacity Input Hopper100 cards
Card Capacity Output Hopper25 cards
Power Supply100-240 VAC, 50/60 Hz
Print TechnologyDye sublimation
Print CapabilitiesSingle or dual-sided
Card Thickness0.010 inches to 0.040 inches
Supported Card SizesCR80 (85.6 mm x 54 mm)
ConnectivityUSB and Ethernet
Operating System SupportWindows 7, 8, 10, Server 2008, 2012, 2016
Weight5.49 kg (12.1 lbs)
Operating Temperature15°C to 35°C (60°F to 95°F)
Operating Humidity20% to 80% (non-condensing)
Print SpeedUp to 250 cards per hour (YMCKT)

Related product manuals