Epson AcuLaser C3900N - Page 42

Default
YES
IP ADDRESS
Purpose
Sets the IP address of this printer on the network.
Range
0–255 for each xxx triplet
Use the Up and Down keys to increase or decrease each number; use the Left and Right keys to
move between triplets.
Default
000.000.000.000
SUBNET MASK
Purpose
Sets the subnet mask value of the network. The subnet mask allows you to limit access to your
printer (for example, according to departmental divisions).
Range
0–255 for each xxx triplet
Use the Up and Down keys to increase or decrease each number; use the Left and Right keys to
move between triplets.
Default
255.255.000.000
DEFAULT GATEWAY
Purpose
Sets the address of the router/gateway if a router/gateway is used on your network and you
allow users outside your network environment to print on your printer.
Range
0–255 for each xxx triplet
Use the Up and Down keys to increase or decrease each number; use the Left and Right keys to
move between triplets.
Default
000.000.000.000
DHCP
Purpose
If there is a DHCP server on the network, specifies whether the IP address and other network
information is automatically assigned by the DHCP server.
Options
ON
OFF
Default
ON
AcuLaser C3900 Reference Guide
Understanding the Ethernet Configuration Menus 42