Epson AcuLaser C3900N - Page 43

BOOTP
Purpose
If there is a BOOTP server on the network, specifies whether the IP address and other network
information is automatically assigned by the BOOTP server.
Options
ON
OFF
Default
OFF
ARP/PING
Purpose
Select whether or not the IP address is automatically acquired.
Options
ON
OFF
Default
OFF
HTTP – ENABLE
Purpose
Select whether or not to enable HTTP.
Options
YES
NO
Default
YES
FTP – ENABLE
Purpose
Select whether or not to enable FTP.
Options
YES
NO
Default
NO
TELNET
Purpose
Select whether to enable or disable Telnet transmissions.
Options
ENABLE
DISABLE
Default
DISABLE
AcuLaser C3900 Reference Guide
Understanding the Ethernet Configuration Menus 43