Epson AcuLaser C900 - Left Cover; Front Cover

EPSON AcuLaser C1900/AcuLaser C900 Revision B
Disassembly and Assembly Cover Removal 179
4.4.6 Left Cover
1. Remove the MP Tray Top Cover and the MP Tray from the printer body.
2.
Remove the Upper Front Cover. (p.177)
3. Remove the Top Cover. (p.177)
4. Remove the Left Cover. (3 screws)
(See
“Figure 4-10 (p.179)”)
4.4.7 Front Cover
1. Remove the Upper Front Cover. (p.177)
2. Remove the Top Cover. (p.177)
3. Remove the Front Door. (p.178)
4. Remove the Front Cover. (5 screws)
(See
“Figure 4-11 (p.179)”)
Figure 4-10. Left Cover Removal
Figure 4-11. Front Cover Removal
The Left Cover is provided with two hooks at its top and two hooks at
its bottom. In installation, make sure that all the four hooks are
engaged with the printer body.