Epson AcuLaser C900 - Manual Paper Feed Solenoid (SL1)

EPSON AcuLaser C1900/AcuLaser C900 Revision B
Disassembly and Assembly Printer Main Parts Disassembly and Assembly 200
4.5.18 Manual Paper Feed Solenoid (SL1)
1. Remove the Upper Front Cover. (p.177)
2. Remove the Top Cover. (p.177)
3. Remove the Rear Cover. (p.178)
4. Remove the Left Cover. (p.179)
5. Remove the Right Door. (p.180)
6. Remove the Front Cover. (p.179)
7. Remove the High Voltage Unit (HV). (p.188)
8. Remove the Engine Board (PWB-A). (p.184)
9. Remove the Bottom Plate. (11 screws)
(See
“Figure 4-53 (p.200)”)
10. Remove the Manual Paper Feed Assy. (5 screws)
(See
“Figure 4-54 (p.200)”)
11. Remove the Manual Paper Feed Solenoid. (1 screw)
(See
“Figure 4-55 (p.200)”)
Figure 4-53. Removing the Bottom Plate
Figure 4-54. Removing the Manual Paper Feed Assy
Figure 4-55. Removing the Manual Paper Feed Solenoid