Epson AcuLaser C900 - Storage and Transport Environments for Packages

EPSON AcuLaser C1900/AcuLaser C900 Revision B
Product Description Basic Specifications 39
NOTE 1: Operation currently taken into consideration as conditions for life determination
•AIDC
•ATVC
• Preliminary operation at the time of consumables exchange. (T/C, D/C)
2: Operation currently witch not taken into consideration as conditions for life
determination.
• Power ON/OFF
• Jam processing
3: Paper kind
• Low-speed<2>: Thick paper / Coated paper
• Low-speed<3>: Transparency
Note *1: Life ends if print at low duty ratio; less than 5%.
• 4.5k cartridge: Up to 6000 pages (A4size)
• 1.5k cartridge: Up to 2000 pages (A4size)
*2: Life become shorter if an intermittent printing (1P/J) is made at low speed mode.
1.2.9.3 Storage and Transport Environments for Packages
 Temperature and Humidity Conditions
Note *1: Condensation must be avoided
*2: Storage period after unsealing is up to 12 months under operating environments.
Condensation must be avoided
 Barometric Pressure in Storage (Altitude)
740 ~ 1013 hPa
 Dropping for Packages
No damage in JIS Z0200-1999 Level 1.
 Vibration for Packages
No damage in the following conditions.
Frequency : 5 ~ 100 Hz (5 minutes)
Acceleration : 7.35 m/s
2
(0.75 G)
Excitation direction : X, Y, Z directions
Excitation time : 60 minutes for each direction of X, Y, Z
(180 minutes in total)
 Packaging Specifications
Refer to the packing specifications.
Table 1-25.
Temperature Humidity
Warranty
Period
*2
Normal conditions 0 ~ 35 °C 30 ~ 85%RH
*1
18 month
(unopened)
Severe conditions
High temperature:35 ~ 40 °C
Low temperature:-20 ~ 0 °C
High humidity:85 ~ 95%RH
*1
Low humidity:10 ~ 30%RH
*1
1/30 of 18
month