EasyManua.ls Logo

Epson AcuLaser C900 - Operating Conditions

Epson AcuLaser C900
270 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
EPSON AcuLaser C1900/AcuLaser C900 Revision B
Product Description Basic Specifications 33
Height of Curl of Printed Pages
NOTE 1:
Same in both simplex printing and duplex printing
2:
Measuring conditions
Non arrayed monochrome printing with 5% of image occupation rate, or
color printing with 5% of image occupation rate for each color (20% in
total). Measured after 1 p/J of intermittent printing for 10 sheets and leaving
unattended for one minute.
Image occupation rate and alignment pattern differ depending on printing
condition.
1.2.4.2 Durability
Printing Volume
Average 3,000 pages / per month
Maximum 35,000 pages / per month
NOTE: The standard mode provides print ratio between color <2P/J> and
monochrome <3P/J> as color: monochrome = 1: 3
1.2.4.3 Maintenance
MTTR Within 30 minutes in average.
(Time required for service personnel to determine and correct the cause of the
malfunction)
1.2.5 Operating Conditions (Including Consumables)
Air Temperature and Humidity
Air Pressure (Altitude)
741 hPa or more (2,500 m or less)
Level
1° difference or less in front and back, or left and right.
Lighting
3,000 lx or less (no exposure to direct sunlight)
Table 1-17. Height of Curl of Printed Pages
Paper type Height of curl
Standard paper, plain paper 30 mm or less
Transparency 15 mm or less
Other special applications Not regulated
Table 1-18.
Temperature (°C) Humidity (%RH) Others
Printer is in operation 10 ~ 35 15 ~ 85 With no condensation
Printer is stopped
0 ~ 35 10 ~ 85
Unattended time:
72 hours or less

Table of Contents

Related product manuals