Epson AcuLaser C900 - Basic Printer Specifications; Process Specifications; Printer Basic Specs

EPSON AcuLaser C1900/AcuLaser C900 Revision B
Product Description Basic Specifications 24
1.2 Basic Specifications
1.2.1 Process Specifications
 Printer formula
Semi-conductor laser beam scan and elector photography with dry single
component no electromagnetic toner.
 Light Source
Semi-conductor laser
 Photoconductor Unit
OPC (organic photoconductive conductor) drum
 Charging
Needle electrode scorotron charger
 Development
Exposed area development
 Toner
Nonmagnetic one-component toner
 Primary Transfer
Electrode roller transfer method
 Intermediate Transfer
Intermediate transfer belt method
 Secondary Transfer
Roller transfer method
 Fixing
Heated roller fuser method
 Density Adjustment
Automatic adjustment (not adjustable by user)
1.2.2 Printer Basic Specifications
 Resolution
600 dpi
 Warming Up Time
 100 V, 120 V : 180 seconds or less (in 23 °C 55%RH, rated voltage)
 220~240 V : 180 seconds or less (in 23 °C 55%RH, rated voltage)
 Printing Mode
 B/W mode : A regular monochrome mode that prints fastest.
 Color mode : A color mode that uses Y, M, C, K toners.
 Speed Mode
 Standard mode : Paper feeding at the main unit's fastest speed.
 Low-speed <1> mode : Reduce the envelope feeding speed to retain the
quality.
 Low-speed <2> mode : Reduces paper feeding speed to ensure satisfactory
fusing at printing on thick paper, label sheets or
coated paper exceeding 90g/m
2
(24 lb).
 Low-speed <3> mode : Reduce the paper feeding speed to retain the fixity of
printing on transparencies.