Epson AcuLaser C900 - Rack Motor (M2)

EPSON AcuLaser C1900/AcuLaser C900 Revision B
Disassembly and Assembly Printer Main Parts Disassembly and Assembly 190
4.5.9 Rack Motor (M2)
1. Remove the Cleaner Pressure Flapper Solenoid (SL4). (p.189)
2. Remove the cam inside the printer body (1 E-ring) and remove the Rack Drive Assy. (5
screws, 2 sets of harness)
(See
“Figure 4-29 (p.190)”)
3. Remove the shaft of the Rack Clutch and remove the Drive Gear.
(1 E-ring) (See
“Figure 4-30 (p.190)”)
4. Remove the Rack Motor (2 screws)
(See
“Figure 4-31 (p.190)”)
Figure 4-29. Removing the Rack Drive Assy
Figure 4-30. Removing the Drive Gear
Figure 4-31. Removing the Rack Motor