EPSON AcuLaser C1900/AcuLaser C900 Revision B
Adjustment USB ID Input 211
5.2.3 USB ID Confirmation
1. Execute the program which was used to write the USB ID, and select the model name.
2. When the window as shown below appears, check “Verify USB ID” and click the OK
button.
3. The window as shown below will appear and a status sheet will be printed
automatically.
4. Check that the USB ID printed on the status sheet is identical with that shown on the
window.
After completion of confirmation, press the Return button.
C A U T I O N
Once you have input a new USB ID, never forget to confirm it on
the status sheet.
To Next Page
Loading...
