Epson AcuLaser C900 - Cleaner Pressure Flapper Solenoid (SL4)

EPSON AcuLaser C1900/AcuLaser C900 Revision B
Disassembly and Assembly Printer Main Parts Disassembly and Assembly 189
4.5.8 Cleaner Pressure Flapper Solenoid (SL4)
1. Remove the Upper Front Cover. (p.177)
2. Remove the Top Cover. (p.177)
3. Remove the Rear Cover. (p.178)
4. Remove the Left Cover. (p.179)
5. Remove the Power Supply Fan Motor (M4). (p.185)
6. Remove the High Voltage Unit (HV). (p.188)
7. Remove the Cleaner Pressure Flapper Solenoid. (1 screw)
(See
“Figure 4-27 (p.189)”)
Figure 4-27. Removing the Cleaner Pressure Flapper Solenoid
Figure 4-28. Mounting Position of Cleaner Pressure Flapper Solenoid
When installing the Cleaner Pressure Flapper Solenoid, adjust the
following positions:
 Position of the cam inside the frame
 Position of the solenoid claw