Epson AcuLaser C900 - Page 55

EPSON AcuLaser C1900/AcuLaser C900 Revision B
Product Description Control Panel 55
Note *1: This setting menu is displayed only when the support mode has been activated by the
hidden operation when the power is turned on.
*2: Displayed and possible to be executed only when HDD is installed
*3: Displayed only when the optional PostScript3 module is installed
*4: The STANDBYTIME command (nondisclosure) of EJL is also supported. The
default value is 30 minutes.
*5: This setting menu is displayed only when the maintenance mode has been activated
by the hidden operation when the power is turned on. Displayed always in English
regardless of the value of Setup→Lang.
A list of user setting items which are not included in the setup menu are shown below.
Depending on the panel initialization menu, these are not cleared when the settings are
initialized.
Table 1-41. Function Setting (7)
Menu Item Value
Support Menu
*1
HDD Format
*2
PS3 HDD Init
*2,*3
Sleep Mode
*4
Enable, Disable
Printer Adjust Menu
*5
Developer Duty 0, 1, 2, 3, 4
Normal -15 ~ 0 ~ 15 step 1
Thick -15 ~ 0 ~ 15 step 1
Trnsprnc -15 ~ 0 ~ 15 step 1
Envelope -15 ~ 0 ~ 15 step 1
Thick Back -15 ~ 0 ~ 15 step 1
Maintenance Menu
*5
Engine Status Sheet
Reset Fuser Counter
Fuser Temp. -20 ~ 0 ~ 20 step 1
Clear Error Log