Epson AcuLaser C900 - Page 63

EPSON AcuLaser C1900/AcuLaser C900 Revision B
Product Description Control Panel 63

AIDC value at C 25%
*1
AIDC value at C 25% determined by the last AIDC processing. The value is stored
when AIDC processes.
 AIDC value at C 50%
*1
AIDC value at C 50% determined by the last AIDC processing. The value is stored
when AIDC processes.
 AIDC value at C 75%
*1
AIDC value at C 75% determined by the last AIDC processing. The value is stored
when AIDC processes.
 AIDC value at M 25%
*1
AIDC value at M 25% determined by the last AIDC processing. The value is
stored when AIDC processes.
 AIDC value at M 50%
*1
AIDC value at M 50% determined by the last AIDC processing. The value is
stored when AIDC processes.
 AIDC value at M 75%
*1
AIDC value at M 75% determined by the last AIDC processing. The value is
stored when AIDC processes.
 AIDC value at Y 25%
*1
AIDC value at Y 25% determined by the last AIDC processing. The value is stored
when AIDC processes.
 AIDC value at Y 50%
*1
AIDC value at Y 50% determined by the last AIDC processing. The value is stored
when AIDC processes.
 AIDC value at Y 75%
*1
AIDC value at Y 75% determined by the last AIDC processing. The value is stored
when AIDC processes.
 AIDC value at K 25%
*1
AIDC value at K 25% determined by the last AIDC processing. The value is stored
when AIDC processes.
 AIDC value at K 50%
*1
AIDC value at K 50% determined by the last AIDC processing. The value is stored
when AIDC processes.
 AIDC value at K 75%
*1
AIDC value at K 75% determined by the last AIDC processing. The value is stored
when AIDC processes.
The above values will be reset to zero when the InitializeEEPROM clear command of
the ESCPAGES-02 protocol is executed. This operation will be performed by a hidden
function of the printer driver.
Note *1: The information is used in the Engine status sheet.
*2: Possible to take a value of the ESCPAGES-02 protocol.