Epson Aculaser C9200N - Page 125

EPSON AcuLaser C9200N Revision D
Troubleshooting Service Call Error 125
Confidential
E630: IDC SENSOR (FRONT) FAILURE E631: IDC SENSOR (BACK) FAILURE
Relevant Electrical Parts
IDC Sensor
Step Action
Connection Diagram
Control Signal
Location
(electrical parts)
1 Check that the IDC Sensor is properly
installed and correct as necessary.
--- ---
2 Check if the IDC sensor is dirty and
correct as necessary.
--- ---
3 Check the IDC Sensor connector for
proper connection and correct as
necessary.
--- ---
4 Check the PWB-M connector for
proper connection and correct as
necessary.
--- ---
5 Change the cable that connects IDC
Sensor and PWB-M.
--- ---
6 Change the IDC Sensor. --- ---
Relevant Electrical Parts
IDC Sensor
Step Action
Connection Diagram
Control Signal
Location
(electrical parts)
1 Check that the IDC Sensor is properly
installed and correct as necessary.
--- ---
2 Check if the IDC sensor is dirty and
correct as necessary.
--- ---
3 Check the IDC Sensor connector for
proper connection and correct as
necessary.
--- ---
4 Check the PWB-M connector for
proper connection and correct as
necessary.
--- ---
5 Change the cable that connects IDC
Sensor and PWB-M.
--- ---
6 Change the IDC Sensor. --- ---