Epson Aculaser C9200N - Controller Specifications

EPSON AcuLaser C9200N Revision D
PRODUCT DESCRIPTION Product Specifications 21
Confidential
1.1.4 Controller Specifications
BASIC SPECIFICATIONS
EXTERNAL INTERFACES
Figure 1-7. External Interfaces
CPU 32bit RISC CPU
Enhanced Technology NPGI, PGI, CRIT, RIT
RAM Standard (on-board) 256 MB
Maximum 768 MB
Expansion Type DDR333 CL=2.5
(128 MB, 256 MB, 512 MB)
Numbers of slot 1 slot
ROM Type 32-bit width (3.3V)
Program 32 MB (DIMM)
Font Included in the program
Expansion ROM ROM for Adobe PS3 as a standard
EEPROM Serial type 512 kbit
Control panel 22 digits x 5 lines LCD, three LEDs and seven buttons
Printer language ESC/Page-Color, ESC/Page, FX, ESCP2, I239X,
PCL5c, PCL6, Adobe PostScript3 and PDF1.6
Auxiliary software
 Configuration Status Sheet
 Supplies Status Sheet
 Usage History Sheet
 Reserve Job List
 Form Overlay List
 Network Status Sheet
 EpsonNet Config (Web)
 USB Ext I/F Status Sheet (only when connected to
D4 compliant USB devices)
 AUX Status Sheet (only when Type-B level 3 is
installed)
 PS3 Status Sheet
 PS3 Font List
 ROM A Information (only when optional DIMM
is installed)
Standard USB interface
USB 2.0HS Device Interface
Service connector (USB 2.0HS Host Interface)
Parallel interface
IEEE1284 compliant
Ethernet interface
100BaseTX/10BaseT
Option Type-B interface
---
USB 2.0HS Device Interface
Parallel Interface
USB 2.0HS Host Interface
Ethernet Interface
Type-B Interface