Epson Aculaser C9200N - Page 168

EPSON AcuLaser C9200N Revision D
DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 168
Confidential
Waste Toner Collector + Exhaust Filter
Don't burn the used Waste Toner Collector. Toner may spatter and cause fire. And It
may result in burns.
C H E C K
P O I N T
The Exhaust Filter is supplied with the Waste Toner Collector. Replace it when
replacing the Waste Toner Collector.
1. Open the Front Door.
2. Push the unlocking knob in the printer side. And then, pull out the Waste Toner Collector
which popped up from the printer.
E1
3. Remove the Exhaust Filter from the top face of the printer.