Epson Aculaser C9200N - Page 235

EPSON AcuLaser C9200N Revision D
DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 235
Confidential
Main Motor (M1)
1. Remove the Connector [1] and four Screws [2], and remove the Main Motor [3].
B5
C4 D4
[1]
[2]
[3]
4039F2C517DA
Transfer Drive Assy
1. Remove three Screws [1], and remove the Reinforcement plate [2] of the Right Door and
spring [3].
C H E C K
P O I N T
Remove the spring with its tension loosened by declining right before the Left Door is
closed.
B6
C5 D6
[1]
[2]
[3]
4038F2C118DA