Epson Aculaser C9200N - Page 24

EPSON AcuLaser C9200N Revision D
PRODUCT DESCRIPTION List of Printer Messages 24
Confidential
Note : Messages in the table are sorted in the order descending priorities. The message shown
at top of the table has the highest priority.
*1: nnn = Number of written blocks, mmm = total number of blocks
*2: "XXX" is replaced with “Hub” when a USB memory with a hub is installed. Otherwise,
it is displayed as a blank.
*3: See
“3.3.3 Controller Related Error” (p.129) for details.
*4: “WWWWW” indicates the jammed or opened point. See
“3.2.1 Checking a paper
jam type and jammed location” (p.99)
.
*5: uuuu = Either of the following will appear: C, M,Y, K, Cyan (C), Magenta (M), Yellow
(Y), Black (K). Only when a message exceeds the display digit in full spelling,
abbreviated forms (C, M, Y, K) will appear.
*6: ppp = Either of the following will appear: Envelope, Normal.
*7: Error location
*8: Displays relevant values of the paper source in the panel setting except Auto.
*9: Displays relevant values of each paper feed size of the Tray menu in the panel setting.
Error
Set Release Lever to ppp
*6
Position O
w w w w
*7
Open O
Manual Feed sss Δ2
Turn Paper Cassette1 O
Turn Paper Cassette2 O
Turn Paper Cassette3 O
Turn Paper Cassette4 O
Can’t Print Duplex Δ1
Paper Out ttt
*8
sss
*9
O
Paper Set ttt
*8
sss
*9
Δ1
Print Overrun Δ1
Memory Overflow Δ1
Duplex Memory Overflow Δ1
Invalid Data Δ1
CompactFlash Error O
Invalid N/W Module O
Invalid PS3 O
Invalid AUX I/F Card O
Invalid ROM A O
Table 1-6. List of Printer Messages
Class Printer Status Error LED status