Epson Aculaser C9200N - Page 270

EPSON AcuLaser C9200N Revision D
DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 270
Confidential
3. Put the Near Empty Assy [2] through the hole of the Flame bringing down the Near Empty
[2] Assy to the rear side from the front side.
[2]
4. Remove two Connectors and remove the Near Empty Assy.
When installing, insert the white Connector into the Connector of the front side [3]
and insert the blue Connector into the Connector of the rear side [4].
[3] [4]