Epson Aculaser C9200N - Page 290

EPSON AcuLaser C9200N Revision D
DISASSEMBLY AND ASSEMBLY Main Unit Disassembly/Reassembly 290
Confidential
3. Remove the Harness of the Motor Assy [4] from five Wire Saddles [3].
4. Disconnect two Connectors [5].
[3]
[4] [5]
4038F2C167DA
5. Remove two Screws [6], and remove the Motor Assy [7].
6. Remove two Screws [8], and remove the Vertical Transport Motor [9].
[6]
[7]
4038F2C168DA
[9]
[8]
4038F2C520DA