EPSON AcuLaser C9200N Revision D
PRODUCT DESCRIPTION      List of Printer Messages 30
Confidential
Replace Feed Roller 
xxx
Message warning that the paper 
feed roller has reached the end of 
its lifetime when it has been 
continuously used after the 
"Replace Feed Roller xxx" error. 
The print quality is not guaranteed 
while this message is being 
displayed.
This message is cancelled by 
one of the following.
 Executing Clear All 
Warnings in the Reset 
Menu.
 Executing Reset in the 
Reset Menu.
 Replacing the feed roller 
with a new one.
Fuser Needed Soon
The fuser unit is approaching its 
lifetime.
This message is cancelled by 
one of the following.
 Executing Clear All 
Warnings in the Reset 
Menu.
 Executing Reset in the 
Reset Menu.
 Replacing the fuser unit 
with a new one.
Transfer Unit Needed 
Soon
The transfer unit is approaching its 
lifetime.
This message is cancelled by 
one of the following.
 Executing Clear All 
Warnings in the Reset 
Menu.
 Executing Reset in the 
Reset Menu.
 Replacing the transfer unit 
with a new one.
Maintenance Unit 
Needed Soon
This message appears when the 
maintenance unit is approaching its 
lifetime.
This message is cancelled by 
one of the following.
 Executing Clear All 
Warnings in the Reset 
Menu.
 Executing Reset in the 
Reset Menu.
 Replacing the maintenance 
unit with a new one.
Table 1-8.  Warning Message and Troubleshooting
Message Explanation Remedy
Feed Roller xxxNeeded 
Soon
Message warning that the paper 
feed roller is approaching the end 
of its lifetime.
This message is cancelled by 
one of the following.
 Executing Clear All 
Warnings in the Reset 
Menu.
 Executing Reset in the 
Reset Menu.
 Replacing the feed roller 
with a new one.
Non-Genuine Toner 
Cartridge
Warning message that the toner 
cartridge is non-genuine when 
selecting continued use in the user 
confirmation flow.
This message is cancelled by 
one of the following.
 Replacing with a genuine 
toner cartridge.
 Executing Clear All 
Warnings.
 Executing Reset in the 
Reset Menu.
The message occurs when the 
power is turned on again until 
the cartridge is replaced with a 
genuine product.
Table 1-8.  Warning Message and Troubleshooting
Message Explanation Remedy