Epson Aculaser C9200N - Page 323

EPSON AcuLaser C9200N Revision D
ADJUSTMENT Firmware Update 323
Confidential
UPDATE METHOD 2
 Required Tool
 Computer
 USB cable
 Firmware Update Tool
 Control Panel Special Operation
Not required
C H E C K
P O I N T
In this method, update can be executed with the EPSON
Firmware Updater instead of Firmware Update Tool.
Step Explanation Panel display
1 Print a Configuration Status Sheet, and check
the current version.
---
2 Connect the printer to the computer with a
USB cable.
Confirm that the “Ready” is displayed on the
LCD.
3 Turn the computer on and copy the firmware
data file (RCC format) to any directory of the
computer.
---
Ready
4 Start up the Firmware Update Tool.
Specify the port and the program update file
on the selection window of the tool.
---
5 Click [Send] on the Firmware Update Tool
screen.
---
6 “Completion” pop-up window will be
displayed when the data transfer is finished.
Click [OK].
The data LED flashes and “Writing ROM P”
will be displayed on the LCD when data
reception and program update are executed
on the printer.
Step Explanation Panel display
Writing ROM P
Don't poweroff nnn/mmm