Epson Aculaser C9200N - Page 330

EPSON AcuLaser C9200N Revision D
ADJUSTMENT Firmware Update 330
Confidential
8 Check the version of the firmware being
updated and click [Next].
9 Read the notes concerning the update and
click [Next].
Check “The status sheet is printed.” box if
needed.
10 Update is started.
If “The status sheet is printed.” box is
checked at Step 9, update is started after
the status sheet is printed out.
11 After completing the update, reboot the
printer automatically.
When the screen on the right appears,
print the Configuration Status Sheet and
check that the version of Firmware is
updated. Click [Finish].
Step Explanation Program Screen