Epson Aculaser C9200N - Page 334

EPSON AcuLaser C9200N Revision D
MAINTENANCE Cleaning 334
Confidential
 Area around the waste toner collecting port
Wipe the areas around the waste toner collecting port clean of spilled toner and
dirt using a soft cloth dampened with water or alcohol.
Figure 6-5. Cleaning the area around the waste toner collecting port
 Feed roller (Standard cassette (C1))
Gently wipe the rubber part of the feed roller with a well-wrung cloth.
Figure 6-6. Cleaning the feed roller
 Separation roller (Standard cassette (C1))
Gently wipe the rubber part of the feed roller with a well-wrung cloth.
Figure 6-7. Cleaning the separation roller
 Feed roller (MP tray)
Gently wipe the rubber part of the feed roller with a well-wrung cloth.
Figure 6-8. Cleaning the feed roller