Epson Aculaser C9200N - Page 359

EPSON AcuLaser C9200N Revision D
APPENDIX Information Sheet 359
Confidential
Transfer Unit % Rate of the transfer unit
consumption
Mechanical
Controller
0 ~ 127 % Printing New transfer unit
detected
Count
Counters for using the transfer unit Mechanical
Controller
0 ~ 268,435,455 Pages Printing New transfer unit
detected
Changes
Number of replacements of the
transfer unit
Controller 0 ~ 255 Times Clearing the
counter
EEPROM
initialization
Feed Roller
MP/C1/C2/C3/C4
%
Rate of the paper feed roller (feed
roller) consumption
Controller 0 ~ 500 % Printing Counter reset/
EEPROM
initialization
Count
Counters for using the paper feed
roller (feed roller)
Controller 0 ~ 1,000,000 Sheets Printing Counter reset/
EEPROM
initialization
Changes
Number of replacements of the
paper feed roller (feed roller)
Controller 0 ~ 255 Times Resetting the
counter
EEPROM
initialization
Feed Offset MP/C1/C2/C3/C4
Value set by the maintenance menu Controller -3.5 ~ 3.5 --- (Set value) (Setting)
Scan Offset MP/C1/C2/C3/C4
Value set by the maintenance menu Mechanical
Controller
-3.5 ~ 3.5 --- (Set value) (Setting)
ScanOffset Dup MP/C1/C2/C3/C4
Value set by the maintenance menu Controller -3.5 ~ 3.5 --- (Set value) (Setting)
C Regist Feed
Value set by the maintenance menu Mechanical
Controller
-6 ~ 6 --- (Set value) (Setting)
C Regist Scan
Value set by the maintenance menu Mechanical
Controller
-6 ~ 6 --- (Set value) (Setting)
M Regist Feed
Value set by the maintenance menu Mechanical
Controller
-6 ~ 6 --- (Set value) (Setting)
M Regist Scan
Value set by the maintenance menu Mechanical
Controller
-6 ~ 6 --- (Set value) (Setting)
Y Regist Feed
Value set by the maintenance menu Mechanical
Controller
-6 ~ 6 --- (Set value) (Setting)
Y Regist Scan
Value set by the maintenance menu Mechanical
Controller
-6 ~ 6 --- (Set value) (Setting)
Registration
Adjusted value for skew of the PH
unit
Mechanical
Controller
-8191 ~ 8192
(Theoretical value)
--- (Adjusted value) ---
Loop Fuser Value set by the maintenance menu Mechanical
Controller
-2 ~ 2 --- (Set value) (Setting)
Item Explanation
Count
processing and
storage location
Range Unit Count conditions Clear conditions