Paper feeding is crooked or the paper jams.
Turn off the printer and pull out the paper. Insert a new sheet
straight into the paper guide. Be sure, you’re using the right
type of paper. See the paper specifications in the Appendix.
Make sure that the printer cover is closed.
Paper does not eject completely.
Use
the LF/FF
button to eject the page.
Make sure the printer cover is closed.
The paper may be too long. Use paper that is within the
specified range. See the paper specifications in the Appendix.
Continuous paper does not feed properly
The tractor does not feed the paper.
Check that the paper release lever is pulled forward to the
continuous paper position. If not, move the lever to the correct
position.
The paper may have come off the tractor. Re-attach the paper
to the tractor.
6-8 Troubleshooting
To Next Page
Loading...
Need help?
General
