Changing the Default Settings
The default settings control many basic functions of the printer.
While you can control many of these functions through your
software or printer driver, you may sometimes need to change a
default setting from the printer’s control panel through the Default
Setting mode.
To enter Default Setting mode, hold down the
Pitch
button while
turning on the printer. The printer prints an instruction sheet.
Follow the instructions on this sheet, and in this section, to change
settings using the Default Setting mode.
Selecting an instruction sheet language
Follow these steps to select the language in which you want to
print the rest of the Default Setting mode instructions:
1.
Press the
Pitch
button until the
Pitch
lights indicate the
language you want to select.
2.
Press the
Tear Off /Bin
button to save your selection.
3.
Press the
Font
button to print out the instruction.
Using the Printer
3-7
To Next Page
Loading...
Need help?
General
