loading paper with the high capacity cut-sheet feeder
Load paper using the high capacity cut-sheet feeder as follows:
1.
Turn off the printer.
2.
Push down the center support. Slide the left paper guide so it is
aligned with the arrow mark on the back side of the center
support. Next, slide the right paper guide to match the width
of your paper. Slide the paper stacker midway between the
paper guides.
3.
Pull the paper-set levers all the way forward until the paper
guides retract and lock open to allow for paper loading.
4-4
Using Printer Options
To Next Page
Loading...
Need help?
General
