Other control panel features
The control panel also gives you to access to several other
functions. To activate the functions listed below, turn on the
printer while pressing one of buttons, as follows:
Load/Eject
Performs a near letter quality self
test. See Chapter 1 for details.
LF/FF
Performs a draft self test. See
Chapter 1 for details.
Pitch
Load/Eject
and
LF/FF
Pause
Activates the Default Setting mode.
See “Changing the Default Settings”
in this chapter.
Prints a data dump. All the input
data are printed as hexadecimal
numbers and corresponding
characters. See “Problems and
Solutions” in Chapter 6.
Starts the Bid adjustment. See “Bid
Adjustment” in this chapter.
3-6
Using the Printer
To Next Page
Loading...
