Setting Up Your Software
Most software lets you specify the type of printer you use so that
you can take full advantage of the printer’s features. Your
software probably provides an installation or setup section that
presents a list of printers.
Microsoft Windows and all Windows programs
If Microsoft
®
Windows™ is installed on your computer system,
follow the steps below to install the correct driver for your printer.
Your printer will work correctly for all your Windows programs,
such as Word for Windows, Lotus
®
1-2-3
®
for Windows, and
CorelDRAW!
®
.
If Windows is not already installed on your system, run the
Windows setup program as described in the documentation that
comes with the program. Then follow the steps below to install the
correct printer driver.
1.
2.
3.
4.
5.
6.
Make sure Windows is running and that the Main window is
open.
Insert the EPSON driver disk into your computer’s diskette drive
slot.
From the File menu
choose Run.
Type
A:\DRIVER\SETUP,
and choose
OK.
(This assumes that
drive A is the diskette drive.)
Select FX-2170 as the Printer Model and click
Continue.
The
printer driver installs automatically.
Click
OK.
Setting Up the Printer
1-15
To Next Page
Loading...
Need help?
General
