Caution:
Make sure you tear off your printed document
before
pressing
the
Load/Eject
button.
Reverse feeding several pages at a time may
cause a paper jam.
Switching Between Continuous Paper and Single
Sheets
When using the push tractor in the front or rear position, you can
easily switch between continuous and single-sheet printing
without removing the paper.
Switching to
single
sheets
To switch from continuous paper to single sheets, follow these
steps:
1.
If any printed sheets remain in the printer, press the
Tear Off /Bin
button to advance the paper to the tear-off
position.
2. Tear off the printed pages.
Caution:
Always tear off paper before back-feeding paper through
the printer; back-feeding too many sheets can cause a
paper jam.
Never back-feed labels. Labels can easily come off their
backing and jam the printer.
3.
Press the
Load/Eject
button. The printer feeds the continuous
paper backward to the standby position. The paper is still
attached to the push tractor but is no longer in the paper path.
4.
Move the paper release lever to the single-sheet position.
5.
Adjust the edge guides to match the width of your paper.
2-24 Paper Handling
To Next Page
Loading...
Need help?
General
